If you’re wondering, “What are safety bollards?” or any safety bollards for sale you’ve come to the right place. Safety bollards protect a variety of facilities. They stand upright and are brightly colored to enhance visibility. They also feature removable molded plastic caps. Each safety bollard measures four-1/2 inches outside diameter and five-eighths inch base plate thickness. Here are some benefits of safety bollards.
Typically made of stainless steel, Fixed safety bollards are suitable for various aesthetic and asset protection applications. These bollards serve to direct traffic and deter vehicle collisions by providing a visual guide for drivers and physical barriers to prevent impact crashes with pedestrians. In addition, these bollards are usually spaced apart so that pedestrian traffic is free to flow freely. Listed below are some of the advantages of Fixed safety bollards.
Before installing a bollard, prepare the site by checking for any underground hazards. If possible, consult a professional to find out where any underground hazards are. Then, use a small drill to mark the center of the hole. Once you’ve marked the centers of the hole, you can drill the full depth of the pipe bollard. You must allow about two to three days for the concrete dome to cure.
Among the benefits of Fixed safety bollards are their durability and easy removal. Their versatility allows for easy installation and dismantling, making them a practical solution for various security and safety needs. Moreover, they are very cost-effective compared to other types of barriers. They are also suitable for basic access control and queueing of vehicles. They are also used for the protection of building property across driveways and at factory door entrances.
Choosing crash-rated safety bollards is vital in preventing accidents, particularly those caused by vehicles traveling at high speeds. Crash-rated bollards are available in many styles, depending on the type of site, traffic conditions, and threats; before deciding on bollards for your site, research federal and state requirements. Then, consider your site’s intended use to determine the right size and style for your location.
Anti-terrorist crash-rated safety bollards are a growing feature of city planning and are required in many government installations. For example, NYPD released a document in 2009 that details its risk assessment process for buildings. This document suggests installing crash-rated anti-terrorist bollards on high and medium-tier buildings that present a high level of vulnerability and threat. Crash-rated bollards can provide security for an entire city, while ongoing research balances different security approaches with the likeliest threats.
Generally speaking, a crash-rated safety bollard can withstand an impact from a 15,000-pound payload. Additionally, it must not exceed certain penetration distances. In the U.S., crash-rated bollards can withstand impact from vehicles traveling at different speeds, and they’re often used at intersections or in a mixed-perimeter setting. They’re often a good choice for entrances to commercial buildings, outdoor seating areas, and public places so that vehicles can’t speed through them easily.
Bicycle safety bollards
Bicycle safety bollards should be placed at intersections where bikes and pedestrians share the road. The distance between bollards and roadways should be adequate to allow both users to pass safely. The placement of bollards should be close to other traffic calming features. However, some bicycle bollards have insufficient sight distance, increasing the risk of injury to cyclists and pedestrians. Bicycle safety bollards should also allow for the passage of tandem bikes, adult tricycles, and bicycles with trailers.
Most bollards are placed in the middle or on both sides of cycle paths. The distance between the bollards should be approximately 1,75 m. It is important to remember that bollards should not block traffic by being obstructive. Some of them are even painted to be soothing and appealing to cyclists. Bicycle safety bollards are also placed on cycle paths to deter motorists from riding on the road.
Many bollards are not installed correctly, which can cause cyclists serious injury. In addition, some bollards have to be placed at a much narrower spacing than would be comfortable for bicycle riders riding in pairs. However, some cyclists in front of the bollards obstruct their view of the bollards and the cyclists in the rear. Therefore, bollards are used only when there is a documented risk of unauthorized vehicles blocking the cycle path.